PPRuNe Forums - View Single Post - New PSU no go, but ....
Thread: New PSU no go, but ....
View Single Post
Old 25th January 2011 | 09:46
  #3 (permalink)  
Albert Square
 
Joined: Jul 2007
Posts: 43
Likes: 0
From: Stockport
Check that the new PSU is giving a power OK signal (5V) on pin 8. This tells the MB that the voltages are stable and the CPU can start. The test MB may not require the power OK signal. The voltages are present anyway.
Albert Square is offline  
Reply
0