PPRuNe Forums - View Single Post - Perf A questions asked at interview
View Single Post
Old 19th Dec 2010, 11:16
  #2 (permalink)  
TimLay007
 
Join Date: Nov 2010
Location: EU
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
A

What is TODR ? (distance from brake release to 35ft... and not V2...) 15ft for wet
What is TORR? (dist from BR to point equidistant between Vlof and 35ft)
Factors on TODR and TORR (1.15x TORR N engine)

VMCG, what does it mean ? what parameter affects Vmcg?
What is V1.
What's happen with TODR and ASDR if V1 is increased or decreased ?
Must know all the factor affecting V1 calculation (wind, slope, mass, flaps, wet rwy)
What is VMBE

What is VMCA
VR must be higher or equal ? 1.05xVMVA
What is the critical engine on a twin jet aircraft ? ;-)

V2 ? "yes this is the tkof safety speed"! but why my V2 is different every day ?
What is THE factor affecting V2 ?
V2 vs VR , factor ? same for V2 vs VMCA

What is a balanced field ?
What is a balanced V1 ? ( when ASDR N = TODR N-1). Why using such a V1...
Determine a cross wind component, eg rwy 18 wind 230/30 ? (the gift one)

Effect on highest flaps setting on take off (field length and climb)

What are the segments of the take off flight path and what are there characteristics ?
(a good one).... (know the start and end point of a segment, climb gradient for each segment, Thrust, Config...)

Obstacle clearance on take off flight path ?

LDR and factor for dry + wet runway
TimLay007 is offline