PPRuNe Forums - View Single Post - radar damage prior to take off?
View Single Post
Old 24th October 2010 | 08:23
  #11 (permalink)  
rudderrudderrat
 
Joined: Oct 2009
Posts: 1,270
Likes: 0
From: UK
Even with equipment built in 1960s (VC9 & 707s), we used the WX radar for take off. It was set with the tilt angle to +5 degs (so no close ground return) and so we could avoid any CBs on the initial climb out.

We could apparently damage the receivers if it was switched on whilst facing a hangar door or large building - but even those sets were designed to be used on take off.

Is any body still using stuff designed in the 50s?
rudderrudderrat is offline  
Reply