Tecnam technical questions.
Would appreciate any advice on the following questions by a Tecnam owner
The Tecnam Bravo is an all metal aircraft with all aluminium panels.
I have recently had a problem with small patches of corrosion appearing on the trailing edge of the panel around the left fuel tank where there is a fuel sender. There are seven spots of corrosion in this one panel in my 4 year old aircraft, and no corrosion anywhere else. The corrosion spots vary in size from a 5c piece to a 20c piece, being mostly the smaller size.
I have queried whether there are copper wires inside the wing at this point, as they could be the cause of the problem.
Tecnam's first response came back that I was not washing the aircraft weekly in accordance with their instructions!!
Any ideas you have on this problem are most welcome. I have heard of aluminium rudders being eaten away by copper anti-fouling on yachts.
Here is another problem I have recently encountered with the Tecnam. A noise has come through my Bose headset which sounds like a radar sweep. The beep is a bit like a reversing garbage truck. I have had the maintenance people check the engine for suppressors, and have also contacted the radio technician, who seems to think it is a mobile phone tower which is off frequency.