PPRuNe Forums - View Single Post - MEP One eng inop Stall
Thread: MEP One eng inop Stall
View Single Post
Old 27th July 2010 | 20:36
  #18 (permalink)  
michael95u
 
Joined: Jul 2008
Posts: 61
Likes: 0
From: Prairie Village, Kansas
  2. Airsped: Vsse or better
  3. Critical engine - simulated zero thrust
  4. Reduce airspeed slowly (1 knot/sec)
  5. Recovery - at first sign of stall (e.g. stall warning) or departure from controlled flight, retard operating engine throttle to IDLE, and lower the nose
  6. Accelerate to and maintain Vyse, slowly increase operating engine power to MCT
Number 3 is wrong. The Vmc demonstration is accomplished with the critical engine WINDMILLING. Which means full idle, but not set for zero thrust. Doing this maneuver with zero thrust set could get you into big trouble.
michael95u is offline  
Reply