Departure calls are only required for IFR departures and VFR into adjoining D CTA (of which there is none at YPJT) and Class C (which you can't do HJ).
Thanks, Awol57 - the report for the IFR departure I can glean from reading AIP and the online tutorial. But, if departing IFR (either into G or C), does the tower require a full procedural departure report as set out in AIP? Ie "ABC, departed at 23, tracking 291, climbing to 3,000, left 700, estimating Woop Woop at 47"?
Will this be required if IFR departing into G on a VFR Departure? (Not clear from any of the material I've seen ...)
You say a VFR into adjoining CTA needs to make a departure report
. That's not what is says in AIP or in the online tutorial, though ...
If it is VMC for the first few days most VFR aircraft won't notice a huge change
That's good! What about the requirement in AIP to stay on tower frequency until instructed to change (which applies to ALL aircraft, including VFR)? Will the tower issue such an instruction to everyone?
And VFRs need to remember, when departing into G, to squawk 3000 until the control zone boundary, then squawk 1200 outside the zone, then reverse the procedure on the way back in from the training area ...