PPRuNe Forums - View Single Post - AS350 Start Procedure - Hydraulic Test
View Single Post
Old 5th March 2010 | 15:23
  #22 (permalink)  
Seismic Pilot
 
Joined: Oct 2006
Posts: 4
Likes: 0
From: British Columbia
Hyd test B2

I think there is some misconception about flight idle and ground idle.
Ground idle is when the machine has just been started and is sitting at 70% ng.Flight idle is when its sitting on the ground at 100% RRPM or in the case of an astar 394 rrpm at flat pitch.
Seismic Pilot is offline  
Reply