PPRuNe Forums - View Single Post - Fly-by-wire elements in the 747-8?
View Single Post
Old 17th February 2010 | 11:46
  #2 (permalink)  
SMOC
 
Joined: Jul 2000
Posts: 1,424
Likes: 0
From: Smogsville
Spoilers as you said plus the O/B ailerons are FBW

Speedbrakes should be as well, I'd say the spoiler mixer and aileron programmer in the wheel wells have been replaced by something new leaving the I/B aileron as the only mechanical roll control and therefore can double as mechanical backup rather than a couple of spoilers like on the 777.

Artificial feel for the roll control is a simple spring and the output is reduced by locking out the O/B aileron at high speed.

I don't think there are any new FBW-"laws" or protections however the -8 will be "tweaked" to fly like a -400.

Elec failures - with 4 engine generators I doubt they'll have any problems, the -400 is no problem with spoiler or O/B aileron issues.

A RAT has been added, I believe it's due to the wind milling speed of the GEnx-2B which are considerably bigger and only have 18 fan blades which may be the cause. I think the RAT is purely for hydraulics sys 3 from memory.

Last edited by SMOC; 17th February 2010 at 12:03.
SMOC is offline  
Reply