PPRuNe Forums - View Single Post - BT Broadband accellerator
View Single Post
Old 25th Jan 2010, 11:15
  #20 (permalink)  
x213a
 
Join Date: Apr 2008
Location: November18
Age: 48
Posts: 258
Likes: 0
Received 0 Likes on 0 Posts
Hmmm, seems my tinkering and removing the bell wire and the subsequent dissconections whilst doing so have caused my IP profile to be lowered from 2000Kbps to 1500, now getting speeds of roughly 1.3M.

Reading about tells me I'm still in the 10 day test period and my IP profile should raise according to line capability. I rang BT and a nice Indian chap advised me to turn off my router every night and turn it on in the morning to reset my profile. This is in contradiction to everything else I have read - that doing so would lead the exchange to believe there was an error on the line, and thus reset my initial ten day settling in period and lower my connection rate???

I ran speedtester this morning and got the following:

Download speed: 1355kbps
Acceptable range of speeds: 400-2000kbps
DSL connection rate 3104kbps downstream / 448 Upstream
IP profile: 1500


Looking at my homehub linestats I get:

Downstream: 3104
Upstream: 448
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.1 Annex A
Latency type: Interleaved
Noise margin (down / up) 8.4db / 18.0dB
Line attenuation (down / up) 54.1 dB / 30.5dB
Output power: (down / up) 4.9dBm / 1.5 dBm

Could somebody kindly explain in layman's terms what the above means and does my line look OK?

Cheers.

Edit> Just had a dissconnection and had to reset. Event log gives this:

Jan 25 12:16:19 2010( 169.230000) Admin login successful by 192.168.1.67 on HTTP
Jan 25 12:15:24 2010INF 2010-01-25T12:15:24Z cwmp: cwmp_session: session completed successfully
Jan 25 12:15:24 2010INF 2010-01-25T12:15:24Z cwmp: cwmp_session: got empty envelope
Jan 25 12:15:24 2010INF 2010-01-25T12:15:24Z cwmp: cwmp_session: got envelope, len=0
Jan 25 12:15:24 2010INF 2010-01-25T12:15:24Z cwmp: cwmp_session: InformResponse is completed
Jan 25 12:15:24 2010INF 2010-01-25T12:15:24Z cwmp: cwmp_session: sending empty envelope to ACS
Jan 25 12:15:24 2010INF 2010-01-25T12:15:24Z cwmp: cwmp_session: InformResponse
Jan 25 12:15:24 2010INF 2010-01-25T12:15:24Z cwmp: cwmp_session: got envelope, len=0
Jan 25 12:15:24 2010INF 2010-01-25T12:15:24Z cwmp: cwmp_session: got envelope, len=455
Jan 25 12:15:21 2010INF 2010-01-25T12:15:21Z cwmp: cwmp_session: sending envelope to ACS
Jan 25 12:15:21 2010INF 2010-01-25T12:15:21Z cwmp: session started event code(s): '1 BOOT'
Jan 25 12:14:51 2010INF 2010-01-25T12:14:51Z cwmp: mt_cwmp: session not established, will retry in 30 seconds
Jan 25 12:14:51 2010INF 2010-01-25T12:14:51Z cwmp: cwmp_session: session completed successfully
Jan 25 12:14:51 2010INF 2010-01-25T12:14:51Z cwmp: cwmp_session: got envelope, len=-1
Jan 25 12:14:51 2010( 81.140000) WGET: Error connecting to host https://pbthdm.bt.motive.com/cwmpWeb/CPEMgt (66.193.112.93:443)
Jan 25 12:14:29 2010INF 2003-01-01T00:00:59Z cwmp: cwmp_session: sending envelope to ACS
Jan 25 12:14:29 2010INF 2003-01-01T00:00:59Z cwmp: session started event code(s): '1 BOOT'
Jan 25 12:14:26 2010( 73.920000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jan 25 12:13:59 2010ERR 2003-01-01T00:00:29Z cwmp: mt_cwmp: session error: Could not resolve host
Jan 25 12:13:59 2010INF 2003-01-01T00:00:29Z cwmp: mt_cwmp: session not established, will retry in 30 seconds
Jan 25 12:13:59 2010INF 2003-01-01T00:00:29Z cwmp: cwmp_session: session completed successfully
Jan 25 12:13:59 2010INF 2003-01-01T00:00:29Z cwmp: cwmp_session: got envelope, len=-1
Jan 25 12:13:55 2010INF 2003-01-01T00:00:25Z cwmp: cwmp_session: sending envelope to ACS
Jan 25 12:13:55 2010INF 2003-01-01T00:00:25Z cwmp: session started event code(s): '1 BOOT'
Jan 25 12:13:38 2010( 25.950000) DVA started

Jan 25 12:13:37 2010( 24.790000) sys_if_stats_reset failed for atm0
Am I going to have the same snags as I did with SKY - intermittent and low connection?
x213a is offline