PPRuNe Forums - View Single Post - B737-800 Engine Start N2 question
View Single Post
Old 15th October 2009 | 19:07
  #22 (permalink)  
sjm
 
Joined: Oct 2000
Posts: 114
Likes: 0
From: uk
Framer!


Performance Inflight – 300
Advisory Information
737-300/CFM56-3_20K
PI.12.8 Revision 0 Jun 2008
ADVISORY INFORMATION
Advisory Information Recommended Brake Cooling Schedule
Reference Brake Energy Per Brake (Millions of Foot Pounds)
-

50tones with a wind corrected brakes on speed of 130kts gives you a min turnaround time of 32 mins @40C.
1 million pounds pressure added for every taxi mile (say 2 miles.)
reverse idle autobrake 1
max wt 51709kgs

doesn't normally cause a problem till f/0 stamps on the brakes like a loon to make a rapid exit.

on our 737-3/500 we are taught fuel in at 25% if it cant reach 25% ( dodgy apu)then max motor <1% per 5 sec.

Have however with a engine that is prone to hot starts very near the limit 715/720C mark motored the engine past 25% to get the egt down. generally only when very hot say 35c im AGP.
sjm is offline  
Reply