Great Job!
This is really a great piece of airmanship work and although cabin crew deserve a word of gratitude (their work was also so important to evacuate all passengers alive!) I must tell you that, I am fascinated by the great job, done on the cockpit.
Yesterday I went to bed still frilled by the outcome of that accident and I have tried to make the exercise of positioning myself in the seat of that captain...it wasn't easy, I must concede. Those who are not pilots and are not familiar with flying a powerless A320 have no idea of the complexity of handling that "glider" (together with the completion of check-lists and the handling of the situation with the chief purser, ATC and Pax.). In the flight Simulator, at Green Dot Speed, one gets a rate of descent of approximately 1800/2200' per minute and the the simple fact of trying to "recover" about five Knots, for instance, will result in the increase of that rate to 2500/2800' sometimes 3000' per minute! Further, as far as I remember, one would be receiving partial hydraulic power trough windmilling and the RAT (minimum speed for power 140Kts) so Slats/Flaps selection would have to be done with parsimony, (at the right altitude, to allow for profile upsets) would come slowly and would influence not only the profile itself, but the Flight Controls behavior also...
Flight Simulators seem to be not prepared for the training of ditching maneuvers, therefore we usually train double engine failures (sometimes with ditching preparation) and subsequent landing on a field witch require planning for touching down on the first segment of the runway. In the present Hudson River case, the "runway" was long, but time was short. No time for mistakes, no second chance for a perfect landing.
They have done well. More than that, they have restored faith on our profession!
Congratulations on a Job Well Done.
Fly Safe
Įgua d'Alte