PPRuNe Forums - View Single Post - Boeing 40C
Thread: Boeing 40C
View Single Post
Old 3rd Jan 2009, 20:22
  #1 (permalink)  
PingDit
 
Join Date: Jun 2007
Location: In the workshop, Prune-whispering.
Age: 71
Posts: 744
Likes: 0
Received 1 Like on 1 Post
Boeing 40C

I recently received an email from a friend in the USA. I thought it interesting and thought you may like to see the photo's. A bit of background first:

Subject:
The Oldest Boeing Airliner in Flying Condition This is as it should be - passengers in closed cabin, pilot in open cockpit so he will stay awake. The airplane is in Spokane , WA , and is the oldest flying Boeing in the World.

After 8 years of repair and rebuilding and 8,000 hours of toil the Boeing 40C rolled out last winter as a finished airplane. They had to wait a few weeks for the snow to melt to fly this baby. They received their Standard Airworthiness Certificate from the FAA and completed the engine pre-oil and fuel flow tests for the first of the taxi tests.

Facts for the Boeing 40 project:
221½ gallons of dope/reducer and 120 yards of 102 ceconite fabric. 12 gallons of poly urethane paint for the sheet metal. The wings have 33,000 individual parts in them. The airplane weighs 4080 lbs empty, has a gross weight of 6075 lbs. It is 34 ft long and 13 feet tall with a wing span of 44½ feet.

Wing loading is 10 lbs per sq ft and power loading is 10 Pounds per HP. It should cruise at 115 mph using 28 GPH, and 32 GPH at 120 mph. It carries 120 gallons of fuel in three tanks.

350 2-inch brushes were used to apply 6 gallons of West Systems epoxy, and 181 rolls of paper towels for cleanup.

There were a total of 62 volunteers who worked on the project to some degree. 21 of the volunteers did a significant amount of work, and 9 of the volunteers worked continuously during the 8 year project.





















PingDit is offline