PPRuNe Forums - View Single Post - CPU clock stopping on an upgrade/newbuild.
Old 24th November 2008 | 00:51
  #17 (permalink)  
twiggs
 
Joined: Oct 2003
Posts: 705
Likes: 0
From: Australia
What happens if you press <ALT> + <F2> during POST instead of <Delete>?
This should go direct to the EZ Flash 2 feature in the bios.

Ditto Keefs post, all attempts should be done with the bare minimum attached.
You can even try with no graphics card if you don't have an alternative one lying around, just listen carefully for the beep codes.

This motherboard should have 2 yellow and 2 black DIMM slots.
It will accept one DIMM module in any slot, but if you have 2, it will only accept them in either the yellow or black, not a combination.

It is also recommended that the BLUE PCI Express X 16 slot is used for single graphics card mode.

Last edited by twiggs; 24th November 2008 at 01:13. Reason: DIMM & Graphics slot info added
twiggs is offline  
Reply