PPRuNe Forums - View Single Post - Flex T/O limitation
View Single Post
Old 1st November 2008 | 15:34
  #6 (permalink)  
FE Hoppy
 
Joined: Sep 1998
Posts: 1,615
Likes: 1
From: wherever
One of these conditions is that Flex T/O thrust should be greater than MCT.
Not sure about this one!!

On the e-jets the lower thrust limit is 25% of rated thrust or CLB 2 + a little bit.

The CLB 2 limit is often the most limiting factor and is lower than CON (MCT)
FE Hoppy is offline  
Reply