PPRuNe Forums - View Single Post - A Ring Around Your Wings
View Single Post
Old 29th October 2008 | 22:41
  #17 (permalink)  
Dave_Jackson
 
Joined: Apr 2003
Posts: 1,635
Likes: 1
From: Vancouver, BC, Canada
A sobering thought;
  • Place a shaft inside your hollow mast.
  • Drive this shaft in the opposite direction from that of the mast.
  • Locate a planetary gear-set at the top of the mast.
  • The shaft drives the sun gear.
  • The hollow mast drives the planetary gear holder.
  • A circular mass is attached to the outside of the ring gear by a universal joint.
  • A strong swashplate is attached to the bottom of the circular mass.
  • Two rod extends down from this swashplate to the root of each of the two blade.
  • The blades are given hub-springs.
--------------------
  • The circular mass provides the increased inertia.
  • Plus;
  • The weight of the inertia can be lighter because of its very high rotational speed.
  • Plus, Plus;
  • The craft now has greater cyclic control due to the moments created by the hub-spring on the rotor and the teetering of the rotating mass.
Now to join you.
Dave_Jackson is offline  
Reply