ENG stall after take-off
737 pilot,
If you experience an engine stall after take-off:
A. your immediate action will be to monitor the engines and obviously controlling your aircraft.
B. Once above 400 ft. with flight path fully under control and on PF command (Airbus states that the PIC may start managing the failure below 400 ft. in certain cases if the aircraft and its flight path is under control and he/she deems it necessary to do so). you will identify the correct engine and slowly reduce(or ask the PF to do so) the relevant throttle to idle and select the ignition to cont. relight to protect the good engine (Both actions are memory items). If the stall continues you will now call for/do the engine stall checklist by following the QRH.
C. If the stall has stopped at this stage you will then do your normal after take-off checklist followed by the engine stall checklist.
Hope this helps,
ROTS