Originally Posted by
cpl4hire
Could you pm me the info about adjusting Peltor headsets for compatability with other headsets (or just put it in this thread).
Sure.
If you unclip the ear cushion from the cable side of the headset and remove a couple of pieces of form, you'll see something like this (click for a larger image):
I've circled in red the DIP switches that adjust the mic pre-amp gain. The settings are as follows:
- 1 ON, 2 ON - 300 mV (quietest setting)
- 1 ON, 2 OFF - 380 mV
- 1 OFF, 2 ON - 480 mV
- 1 OFF, 2 OFF - 680 mV (loudest setting)
In the picture shown, 480 mV is selected. My two headsets both came set to 680 mV.
Mark