PPRuNe Forums - View Single Post - Form 1's and FAA 8130-3's
Thread: Form 1's and FAA 8130-3's
View Single Post
Old 27th February 2008 | 22:04
  #5 (permalink)  
wigglyamp
 
Joined: Nov 2007
Posts: 408
Likes: 0
From: Too close to EASA
From EASA Part 21
21A.307 Release of parts and appliances for installation
No part or appliance (except a standard part), shall be eligible for installation in a type-certificated product unless it is:
(a) Accompanied by an authorised release certificate (EASA Form 1), certifying airworthiness; and
(b) Marked in accordance with Subpart Q.

GM 21A.307
Release of Parts and Appliances for Installation
“Authorised release certificate certifying airworthiness for a new part or appliance” means certifying
that the part or appliance conforms with the approved design data and is in condition for safe
operation.

This doesn't mention the FAA 8130-3, but the EASA-FAA Bi-lateral allows use of an 8130-3 when correctly certified in box 13 by a repair station holding EASA approval.
wigglyamp is offline  
Reply
0