My turn now (memory problem)
Perhaps inspired by the recent thread, I have purchased 2x1gb modules to replace the 2x256mb in my Dell Dimension 3000.
They appear to tick all the right boxes and are exactly as described on the Crucial website, as well as the Dell .pdf manual.
Only thing I have noted is that the RAM speed in the bios is shown at a fixed 333 and these are rated at 400. When installed, the machine gives four beeps which I believe is code for RAM error, but I can't see anything going on because the on board video of course utilises the RAM, so the screen stays blank!
Any thoughts?