Hi,
wondered if you somebody may be able to help me.
i have my virgin coaxial cable coming from outside and being connected to the 'cable in' port on my virgin v+ box, i also have my external tv aerial (coax) connected to the 'antenna' port on the v+ box and a coax cable going from a port called 'to tv' to my media centre port 'vhf/uhf'
both the v+ box and my media centre box are linked the tv with hdmi cables
when i run the tv setup on my media centre, when it starts scanning for a signal it doesn't find anything and says to check hardware setup
. also in the list that appears down the left hand side as the scanning is in process, should hdmi be listed
Thanks for your help
Miguel