PPRuNe Forums - View Single Post - ASI calibration Q
View Single Post
Old 28th March 2007 | 18:16
  #16 (permalink)  
IO540
20 Anniversary
 
Joined: Jun 2003
Posts: 13,787
Likes: 0
From: EuroGA.org
A very good point about the vibration... it is necessary to overcome stiction within the instrument. Same with a vertical card compass I have.

The instrument was certainly not vibrated during that test. But then neither were the altimeters, which are described as "sensitive altimeters"; the operating ceiling is 20,000ft.
IO540 is offline  
Reply