PPRuNe Forums - View Single Post - Point-to-point Navigation
View Single Post
Old 31st Jan 2007, 10:20
  #2 (permalink)  
the dean
 
Join Date: Sep 2006
Location: 10 west
Posts: 325
Likes: 0
Received 0 Likes on 0 Posts
hi constelation...

not sure what you are asking.

if its how to plot between two points that just happens to be the intersection between two radials ( the dme is unimportant )...then its just the same as working out track, adjusting for variation, adjusting plus or minus for the wind correction and adding or subtracting the variation to get a compass course to fly...as if flying between two ground features or airports.if you want to go to a certain point ( in your example the intersection of two radials ...first you need to draw a line on a map from where you are to where you intend to go...then use the method i outline...but you need to start with a map and your computer...

the method of doing these things would be explained to you by your instructor...or you will get in in the booklet with your 5B or CRP 1.

you need to explain your problem a bit more...

perhaps i misunderstand.

the dean.
the dean is offline