Indeed I am a very confused person, but think this was a type error in the manual.
For the MEP take off requirements it states:
1.When no stopway or clearway is available the take off distance x 1.25 must not exceed the TORA
2. When stopway or clearway is available the take off distance must:
a. not exceed TORA
b. When multiplied by 1.3 not exceed the ASDA
c. When multiplied by 1.15 not exceed TODA
THAT MAKES PERFECT SENSE, but for the SEP, it was worded completely differently:
Field length requirements:
a. When no stopway or clearway is available the take off distance must not exceed 1.25 x TORA
b. When you have a stopway or clearway, take off distance must not exceed
1. Tora
2. 1.3 x ASDA
3. 1.15 the TODA
Which makes no sense at all; perhaps what they ment, like for the MEP is that the take off distance when multiplied by 1.25 must not exceed the TORA. That then makes perfect sense.....
Sorry to confuse you Old Smokey, but I hope you can see that the wording in the Cap 698 makes sense in the MEP section but not the SEP, hence both our confusion!!!
Thank you for your reply nonetheless
Cheers