PPRuNe Forums - View Single Post - dry/ wet screen height
View Single Post
Old 20th January 2006 | 15:18
  #2 (permalink)  
The Flying Cokeman
20 Anniversary
 
Joined: Dec 2005
Posts: 700
Likes: 14
From: EU
hello,
The screen height on a wet runway is reduced to 15 ft because you are using a wet v1 speed. This is due to a portion of the airborne distance being added to the ground run as a result of the increased ground run used between the wet v1 and vr if an engine fails at the worst point, after the wet v1.
tfcm
The Flying Cokeman is offline