PT6 Tech
unctuous thanks that was the pic I was trying to load the pt6 has 3 governors. one for the FCU, two for the prop, and one for prop runaway ie: the hydraulic overspeed governor. The N1 or FCU controls fuel flow governing N1 speed set on a rear mounted accesory pad. prop governor sets speed of prop with the FTG set at normally 106% of selected prop releases p3 bleed air which reduce fuel flow on the FCU mounted on the top of the reduction gear box primary prop gov/FTG are combined, the HOG releases prop hub oil to govern as a last ditch in Prop overspeed situations. Don't know if the Turbo Mallard has the centripetal start lock system, this allows props to start in the ground idle position.