PPRuNe Forums - View Single Post - Radar Altimeter
Thread: Radar Altimeter
View Single Post
Old 3rd August 2005 | 10:37
  #15 (permalink)  
delta3
Passion Flying Hobby Science Sponsor Work
 
Joined: Apr 2004
Posts: 461
Likes: 0
From: Belgium
puntosaurus

Hi

By reading the postings, it feels like a 20°x2=40degrees upto 30°x2=60 degrees cone would be OK

It should pick up the minimum over a reasonable surface below.
I see no value in NOT detecting the cliff in the given example 20ft on 150 feet, I hope it does detect the cliff. At 150ft/150ft it should not detect the cliff.

The angle of the cone also solves the problem of being not guimbaled and still providing correct reading with banking up to 20-30 degrees.

One of the days I'll check this with the TRA3500

Added : by re-reading the TRA3500 specs I found : "Antenna's response angle when mounted +- 6 degrees from horizontal = Dual : +- 20degrees for pitch, +- 30 degrees for roll.

So the designer adapted the cone for 30 degrees banking and 20degrees pitching.

At 150 ft it should detect the cliff from 50 ft at the front/rear, and from 70 feet sideways.

D3

Last edited by delta3; 3rd August 2005 at 10:55.
delta3 is offline