PPRuNe Forums - View Single Post - Direction of main rotor rotation
View Single Post
Old 19th Apr 2005, 08:35
  #10 (permalink)  
ConwayB
 
Join Date: Nov 2003
Location: Townsville Australia
Posts: 115
Likes: 0
Received 0 Likes on 0 Posts
An explanation... sort of.

Hi,

Was looking for the same answer when I came across this website trying to explain why some helicopters have a direction of rotation clockwise and others anti clockwise.

Interesting to see that MBB/Kawasaki decided to follow the American convention and rotate anti clockwise. Now that MBB is part of Eurocopter, they have some rotating one way and some rotating the other way.

Production licensing explains some other reasons.

I have cut and pasted the explanation below from the following website:

http://www.aerospaceweb.org/question...s/q0212b.shtml


It doesn't explain why there's a difference, but it does explain why some companies/countries have gone in a particular direction.

Cheers
Conway
Is it true that the main rotors of American helicopters rotate counter-clockwise while European helicopters rotate clockwise? If so, why? I have been told this stems from a German twin rotor helicopter being halved and distributed between the Allies at the end of World War II.
- Glenn Dawkins, Steve, Tom

It is true that there are two consistently opposite trends in the direction the main rotor of a conventional single-rotor helicopter rotates. This difference appears to vary with the nation in which a particular helicopter was designed. When viewed from overhead, American helicopter rotors almost universally spin in a counter-clockwise direction. Many European helicopter rotors, on the other hand, tend to spin in a clockwise direction. However, there are several exceptions to these rules, particularly within Europe.
We confirmed these trends by comparing the rotor designs of a number of different helicopters from around the world. Overhead drawings are especially useful since the way in which the rotor blades are attached to the central hub makes it immediately obvious where the leading edge (LE) of a rotor blade is. Knowing which edge of the blade is the leading edge determines the direction in which the blades must rotate to generate lift. Based on the photos and drawings that we could locate, we found that rotors almost always rotate in the same direction depending on the nation the helicopter comes from. Examples are shown in the figure below.



Comparison of helicopter main rotor rotation direction
American helicopters manufactured by companies like Sikorsky, Boeing Vertol, Bell, and MD Helicopters all appear to rotate counter-clockwise like the SH-60 Seahawk illustrated above. The opposite convention is used in all French helicopters built by Aérospatiale, such as the Eurocopter Tigre, as well as all Russian helicopters built by Mil, like the Mi-8. However, the manufacturers in many other European nations use the same convention as the Americans. The helicopters built by Westland in the United Kingdom and Italy's Agusta all rotate counter-clockwise, as exemplified by the EH-101 Merlin and A109. German manufacturers like MBB and the Japanese companies Kawasaki and Mitsubishi also follow the American convention.

We've attempted to investigate how these two opposing philosophies emerged but have yet to find an answer. However, the story about a German twin rotor helicopter being split amongst the allies seems pretty unlikely. The American design layout with counter-clockwise rotor motion can be traced at least as far back as Igor Sikorsky's R-4 helicopter developed during the early 1940s, several years before the end of World War II. Other American helicopter pioneers like Larry Bell, Stanley Hiller, and Frank Piasecki subsequently copied this convention. Westland in the UK and Agusta in Italy as well as the Japanese manufacturers Fuji, Mitsubishi, and Kawasaki all entered the helicopter market by making licensing agreements to build American designs, so this sharing of technology may also explain how those nations came to adopt the American counter-clockwise rotation.

As for France and Russia, we have been unable to determine how manufacturers in those nations came to use a different convention. The same trends are also followed in countries like Poland, China, and India, probably because firms in these nations have also license-built helicopters from Russia and/or France. Whether the decision to adopt an opposite direction of rotation was made for technical reasons or was simply a matter of preference is unclear. If any readers are aware of the answer, please contact us.
- answer by Joe Yoon, 23 January 2005

Related Topics:
ConwayB is offline