OK, Western Digital WD1200JB on IDE1 workin' jes' fine as always.
Now the problem is that if I connect my 2x120gb WD SATA drives to the mobo (FastTrak software recognises the drives and sets up a mirror array no probs) the PC starts to boot windows fine but as soon as its about halfway through loading the system tray icons the PC just reboots, this happens every time until I turn off the PC and disconnect the SATA drive.
[Symptoms lifted almost verbatim from a user's post on the MSI forum for the MSI K7N2 Delta ILSR Mobo - issue wan't resolved]
Starting in Debug mode shows a Stop 0x0000000A or Stop 0xA or IRQL_NOT_LESS_OR_EQUAL
Start in Safe mode and no probs, the array is recognised and Windoze could partition and format it if I wanted. So I don't think it is a power problem.
So somewhere, somehow a driver is clashing. All MSI drivers and XP (ugh!) latest updates in.
Looked at M$'s Troubleshooting Stop 0x0000000A errors
http://support.microsoft.com/default...;en-us;Q314063 & can't figure it out quickly.
Any advice before I start plodding through the tedious remove/check drivers one by one scenario?
Many thanks