PPRuNe Forums - View Single Post - Flaps Drive EICAS
Thread: Flaps Drive EICAS
View Single Post
Old 12th May 2004 | 12:27
  #3 (permalink)  
gonadz
 
Joined: Jan 2000
Posts: 72
Likes: 0
From: LHR/LGW
Try selecting CMC on your free CDU (If you have one). Then select "Eicas Maint Page", then "Flt Cont", then "Display".

This should show you the position of all moveable flap surfaces.

Works for the 744, not familiar with the 777 yet
gonadz is offline