FWIW and I'm happy to cop flack on any mistakes made, I posted this on the Air India 787 thread, with some deletions of material irrelevant to this thread:
I ... note that the primary source of the information on which I’m basing my post is the content of Boeing’s patent application which, of course, does not contain any of the actual wiring diagrams or modification details of the TCMA, even assuming it has been implemented. ...
The point of my post is to get other’s thoughts on one of the design principles of the TCMA system proposed in the patent application.
The ostensibly simple and elegant concept is described in the schematic of the system at figure 1 of the patent application. A copy of figure 1 is below.
The TCMA is the part of the schematic inside the dotted box numbered 16, sitting with the EEC (others would call it the FADEC) in the solid box numbered 18.
The heart of the TCMA comprises two switch relays, numbered 22 and 28 in the schematic, wired in series. Each of those switch relays is controlled by its own, dedicated engine control malfunction software, identified as the blobs numbered 130. (The patent application identifies component 34 as a dedicated processor and 32 as the diode connected to the switch relays, but that is evidently a mistake. Component 34 is the diode and I can’t find a component number 32 anywhere in the schematics.)
Each relay switch and its controlling software is described as a ‘channel’, one A and one B. Both channels run continuously, monitoring throttle position (36 in the schematic) versus engine data fed from ARINC data bus lines (46 in the schematic) and “dedicated input sensors” not shown in the schematic. Those sensors presumably detect things like weight on wheels and perhaps RADALT.
This design is said to achieve redundancy, because if only one ‘channel’ detects the engine is producing excessive thrust while the throttle is set to idle, that channel will set its switch relay to CUTOFF and that is enough to change the state of the high pressure fuel shut off valve (58 in the schematic). No more motion lotion. In the words of the patent application: Both channels are “always actively monitoring engine function and independently have the capability of shutting down the engine.”
That arrangement wrinkled my crusty old avtech brow. In my mind – and this is why I’m seeking other’s thoughts – the advantage of redundancy arising from the two channels, either or both of which can shut the engine down, is not without risk. If it is possible for one of the channels to have some ‘glitch’ or hardware failure such that it does not detect an actual out of envelope condition justifying immediate shut down, with the other channel detecting the condition and shutting the engine down, it inexorably follows – does it not – that it is possible for one (or both) of the channels to have a ‘glitch’ or hardware failure that results in a shut down when there is no out of envelope condition?
Further, even if there are completely separate, duplicated sensors telling each channel things like the position of the throttle and whether or not there is weight on wheels, there remains the possibility of a combination of sensor failures/disconnects resulting in one channel being ‘convinced’ that an out of envelope condition exists, with a consequential cutoff of fuel to the engine.
I of course acknowledge the valid observations made about the remote probabilities of these kinds of glitches and failures.
I’ve heard rumours that there was much resistance to the mandating of TCMA systems. Having seen many, many strange faults caused by random shorts, open circuits, liquid ingress and other foreign objects, I can understand why there was that resistance. Every time you add something to a system and that added thing has electronic components and software and electrical connections and data inputs, you add risk of that thing malfunctioning or working perfectly but with erroneous inputs. In this case, there are effectively two added new things: two channels, each one of which has the ability to shut off the motion lotion to the engine to which they are strapped.
I make no comment on whether TCMA systems, if fitted, have anything to do with this tragedy.
....
