Cessna Reims F-150 Publications

[ericferret]

Originally Posted by NutLoose

You can buy pattern parts that may require trimming, they will be cheaper and some Cessna parts may no longer be available. Links below

https://www.mcfarlaneaviation.com/pr...er=&view=table

The above sells

https://texasaeroplastics.com/collec...cessna-150-152

i have used parts from all of these before and bar a little time and effort to trim then and put holes in them for the screws, they turn out well.

https://www.knots2u.net/categories/c...52-models.html

We operated both US and French 152’s

What nutloose says is the way to go. We have had no problem. The only issue I have is that I can't find a centre cosole panel that has the cutout for the trim wheel. They used to be made.
I would have prefered one that had the hole built in rather than having to cut.
The other thing we did was to paint the inside of the doors and save the weight of the trim panels(and cost).
The 150 needs all the help it can get as the flight manual climb figures are largely a work of fiction hence the CAA right down..