Originally Posted by
CrazyStuntPilot
You contradict yourself. "clear name of SYSTEM" = "clear ENG 1". There is no exception in the case of fail+shutdown just like there is no exception to this rile in case of rev unlocked+shutdown or any other examples of multiple related system failures, e.g., multiple FCTL or AIR alerts.Try it for yourself in the sim. "One procedure at a time," as stated in the tasksharing table and earlier in the FCTM.
Doing one procedure at a time does not mean saying “clear [name of procedure]” after each is complete.
sonicbum doesnt contradict themselves, you do the ENG 1 Fail procedure followed by the shutdown procedure then you clear ENG 1 which clears both from the ECAM. The only reason you can clear the ENG 1 Fail procedure and still have the shutdown procedure on the screen is because there’s an overflow to the second page. If there’s no overflow the CLR button clears everything under the ENG 1 title which is not what you want if you haven’t done everything. The CLR button clears from underline to underline unless there’s overflow in which case it clears to show the next page.
If this wasn’t the case then you would have to push CLR twice to clear both ENG 1 procedures, but you don’t, you only have to press it once provided there’s no overflow.