Originally Posted by
Jonty
I disagree with both those points.
First the 10 min TOGA limit. 3 issues with this really. First, is it 10 mins total? Is 10 mins continuous? If I use 8 mins during the first go around do I only have 2 mins left? Second, it's actually an EGT limit that's been converted to a time limit because us pilots are too stupid to look at the EGT gauge. If I climb to altitude TOGA, MCT, and Climb Thrust are all the same. Does my 10 min limit count now? Thirdly, and this is the most important, if I need it I'm going to use it. 10 min limit or no 10 min limit. However, it's in the manual that it's a 10 min limit, and so it should be respected where possible. But people need a deeper understanding of why the limit is there and what it's secondly trying to achieve, rather than 10 mins and that's it.
The next point I also disagree with. On an SE missed approach you can follow the EOSID, or the EFATO procedure, or the normal missed approach, or even the normal SID, or any combination of the above. YOU are the captain of your aircraft, its safety is YOUR responsibility, not the manuals, not ATCs, not managements, YOURS.
Let me ask you a practical question, engine failure on approach to destination, high enough to go around and not low enough that you would continue. Can you tell me the exact EOSID? No you can not, hence you will follow the missed approach procedure.
This is why the question is relevant and we are not considering the EOSID.