Originally Posted by
Mooney12
Hi,
Just wanting to gather some thoughts on how to fly an approach, landing and go-around with an engine that is stalled but still producing significant thrust, but not g/a thrust. I know it has to be configured as if single engine, but how would one actually fly it, if the point of engine stall was quite high.
many thanks in advance
Use the engine till final approach keeping it below the stall threshold and prepare for a OEI-like final app that is APU running and thrust level idle shortly before starting the final app. You will avoid any confusion during final app in case the engine starts stalling at lower thrust or in case GA becomes necessary. If the engine starts stalling even at idle thrust consider ecam handling gates and actions below this gate, ie. Continue the approach, stop on the runway and shut down the engine. Brief the whole lot of what if to avoid surprises.