PPRuNe Forums - View Single Post - Bell 407 RESTART FAULT question…
Thread: Bell 407 RESTART FAULT question…
View Single Post
Old 25th October 2022 | 18:04
  #13 (permalink)  
helofixer
 
Joined: Apr 2008
Posts: 69
Likes: 3
From: Louisiana, USA
Yes you will

"Remove airframe 28-volt power from ECU by pulling the FADEC circuit breaker in the
overhead panel, then dwell for a minimum of 30 seconds. A Restart Fault light should
illuminate in the cockpit."
helofixer is offline  
Reply
1