Originally Posted by
FullWings
What’s the connection between FMS use and CDFA? We fly all NPAs as CDFA, whether database or basic modes with fix altitudes, and use the published MDA as a DA.
Hi FullWings
If you use the published MDA as a DA then you will have exceeded your minima. PANS-OPS again:
1.8.2.3 If the visual references required to land have not been acquired when the aircraft is approaching the MDA/H,
the vertical (climbing) portion of the missed approach shall be initiated at an altitude above the minimum descent altitude/height (MDA/H) sufficient to prevent the aircraft from descending through the MDA/H. At no time is the aircraft to be flown in level flight at or near the MDA/H. Any turns on the missed approach shall not begin until the aircraft reaches the missed approach point (MAPt). Likewise, if the aircraft reaches the MAPt before descending to near the MDA/H, the missed approach shall be initiated at the MAPt.
1.8.2.4 An increment for the MDA/H may be prescribed by the operator to determine the altitude/height at which the vertical portion of the missed approach shall be initiated in order to prevent descent below the MDA/H. In such cases, there is no need to increase the RVR or visibility requirements for the approach. The RVR and/or visibility published for the original MDA/H should be used.
Cheers
TeeS