Boeing 737NG. Widely available in the FCOM, however, separate approval by the relevant authority is needed.
Takeoff with light coatings of cold-soaked fuel frost on upper wing surfaces is allowable, provided
the following conditions are met:
• the frost on the upper surface is less than 1/16 inch (1.5 mm) in thickness
• the extent of the frost is similar on both wings
• the frost is on or between the black lines defining the allowable cold-soaked fuel frost area (see figure) with no ice or frost on the leading edges or control surfaces
• the ambient air temperature is above freezing (0°C, 32°F)
• there is no precipitation or visible moisture (rain, snow, drizzle or fog with less than 1 mile visibility, etc.)