Originally Posted by
Dave Therhino
The article is a bit amateurish. Even with the poor article information, it's clear that the test they were doing was the positive g wing loading ultimate load test. Ultimate load is defined as 1.5 times the limit load. I don't know what limit positive load factor is used for the new 777, but it is required to be at least 2.5 g. So their target was to apply loads corresponding to the airplane pulling at least 3.75 g. That test is required by regulation to be done with the fuselage pressurized to the maximum cabin pressure differential. They apparently got a surprise before they made it to the target load. They are trying to give the impression that the door just popped out. However, plug doors don't just pop out. I suspect some significant structural failure of the fuselage occurred to cause the door to be released like that.
Most cargo doors are not plug type.