PPRuNe Forums - View Single Post - Braking deceleration of Airbus A320
View Single Post
Old 15th Jun 2019, 22:12
  #9 (permalink)  
compressor stall
 
Join Date: Feb 2000
Location: 500 miles from Chaikhosi, Yogistan
Posts: 4,295
Received 139 Likes on 63 Posts
Some other pointers/ corrections /additions to above. (Caveat these are A319 figures but all should be the same).
The MAX decelerations setting commands 6m/^2 deceleration rate but wont actually achieve this as it’s greater than what’s the aircraft can do. (The anti skid on the day will determine deceleration rate)
Low starts after 4 seconds after ground spoiler extension. The rate is 1.7m/s^2
MED after 2 seconds @3m/2^2.

There is an option available now to reduce the time delay on LOW to 2 sec.

none of this is relevant for taxi but it might help you refine your question if you need.
compressor stall is online now