Checking reversers with the aircraft stationary at the end of the runway or on the taxiway not a good idea as the reversed exhaust gas flow could blow stones or any other FOD up which could get ingested into the fan or core and cause you an even more significant problem. Not sure what flight crew operating procedures say about stowing reversers on landing at what speed to prevent this (and I'm pretty sure you don't use T/Rev to come to a complete stop), but as an Engineer we do not usually carry out an engine running reverser check on ramp for this reason. We usually have a facility through the CMS to do a cycling check using electrics or hydraulics. I can only speak for what I work on (Airbuses and B744), and there could be exceptions to this.......and yes I do know cascade vanes are designed to mitigate the ingestion of blown up FOD, but still good practice I'm sure.