PPRuNe Forums - View Single Post - Changing auto brake setting during roll out
Old 28th Oct 2018, 15:05
  #30 (permalink)  
Beakor
 
Join Date: Oct 2001
Location: MAN
Posts: 193
Received 0 Likes on 0 Posts
B757 FCOM Systems:

”Autobrake application occurs slightly after main gear touchdown. Deceleration is
limited until the pitch angle is less than one degree, then deceleration increases to
the selected level. The deceleration level can be changed (without disarming the
system) by rotating the selector.”
Beakor is offline