Virtual A320 Triple Hydraulic failure
Join Date: May 2006
Location: Here, there and everywhere
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
EB,
quote
There have been studies done (NASA?) with a view to someday include a "thrust only" reversion into future flight control software.
unquote
NASA (Dryden) developed the PCA (Propulsion Controlled Aircraft) concept using a MD-11 as testbed. There was a very nice article on this on an old Flight Internatinal magazine. The plane being controlled via the MCP, no need to direct handle the levers.
Some additional information: http://www.nasa.gov/centers/dryden/h.../PCA/md11.html
Cheers
BF
quote
There have been studies done (NASA?) with a view to someday include a "thrust only" reversion into future flight control software.
unquote
NASA (Dryden) developed the PCA (Propulsion Controlled Aircraft) concept using a MD-11 as testbed. There was a very nice article on this on an old Flight Internatinal magazine. The plane being controlled via the MCP, no need to direct handle the levers.
Some additional information: http://www.nasa.gov/centers/dryden/h.../PCA/md11.html
Cheers
BF
Join Date: Oct 2001
Location: Kelsterbeach
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
The green and yellow double failure seldomly occurs as two independent failures. Mostly the second failure is caused by the continuous operation of the PTU that connects both systems. Three simultanious failures are even more remote.
Join Date: Jun 2001
Location: Over The Hills And Far Away
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
What should be of more concern than a loss of all hydraulics, is the apparent lack of understanding from qualified crews of how the primary flight controls of their aircraft function.
Join Date: Nov 2007
Location: Northampton
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
If the problem cant be solved with the QRH then you are in "no mans land" How it works is probably of of little use.
One instructor I had in the USA talked about the "BRT" levers. These were the thrust levers. " When you push the BRT levers forward the big round things make more noise, that all you need to know"
One instructor I had in the USA talked about the "BRT" levers. These were the thrust levers. " When you push the BRT levers forward the big round things make more noise, that all you need to know"
Join Date: Jul 2006
Location: Oz
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
guys I think a real lot has to go wrong to be looking at this scenario. You would have to virtually empty out all three hydraulic systems. Pretty unlikely.
Two Engine driven pumps
One electric pump with a ptu to the other side
another electric pump on blue sys and a rat as back up........
thats a fair bit of redundancy.
Two Engine driven pumps
One electric pump with a ptu to the other side
another electric pump on blue sys and a rat as back up........
thats a fair bit of redundancy.
Join Date: Mar 2006
Location: Choroni, sometimes
Posts: 1,974
Likes: 0
Received 0 Likes
on
0 Posts
guys I think a real lot has to go wrong to be looking at this scenario. You would have to virtually empty out all three hydraulic systems. Pretty unlikely.
Mostly G/Y, 'cause GREEN RSVR LOW LVL but YELLOW PTU kept running and overheating YELLOW SYS?
So it needs only one of these days without BLUE SYS.....
Join Date: Jul 2007
Location: In a house
Age: 48
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Look at the rudder system, all 3 hydraulic systems are operating very closely to each other, Souix City, Japan Airlines, both lost all systems from one problem. So why is everyone so certain it will never happen on a a320.
Murphys Law Anyone?
If it can happen, it WILL happen.
Murphys Law Anyone?
If it can happen, it WILL happen.
Thread Starter
Join Date: Dec 2007
Location: I'd like to know
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
What should be of more concern than a loss of all hydraulics, is the apparent lack of understanding from qualified crews of how the primary flight controls of their aircraft function.
What you should be concern about is that a manufacturer like airbus do not even consider possible that one of his planes could suffer by a triple Hyd fail.
Infact, the Initial Airbus training (cbt) doesnt talk about it,the Fcom doesn talk about it.There is nowere any reference were you can get a secure reply about this question.
The only thing you can do is to go throw the aircraft systems charts (flight control) and say ah yes, with no hyd you are on the ground.
Pilots are human beings and it's not 1 month course for a type rating which would give them the full kwnoledge about the airplane tey will fly.
You need time, lot of study and questions like the one i have asked before say that you really know an aircraft.
And i am surely not the kind of person that would feel is the best just because i'm sitted on a 320.
cheers
Last edited by Giggey; 30th Dec 2007 at 09:35.
manufacturer like airbus do not even consider possible that one of his planes could suffer by a triple Hyd fail
They do the maths and they come out with chances of it happenning so low, that it doesn't justify the installing of the fourth system.
Send PM to PBL, if you'd like to see actual numbers and methods of getting them.
However, PTU that doesn't shut itself off with HYD LO LVL is something that Airbus could have done bettter and I hope it will be rectified.
Join Date: Aug 2007
Location: UK
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
They do the maths and they come out with chances of it happenning so low, that it doesn't justify the installing of the fourth system.
Would be interesting what the "maths" say about DUAL HYD SYS LOSS.....
757 and 767 also have three hydraulic systems, albeit without a PTU.
Join Date: Mar 2006
Location: Choroni, sometimes
Posts: 1,974
Likes: 0
Received 0 Likes
on
0 Posts
It's interesting that despite all the cries from pilots about over automation in FBW Airbuses, pilot control of the PTU is a problem.
Pilot's fault?
Last edited by hetfield; 30th Dec 2007 at 12:12.
Join Date: Aug 2002
Location: Switzerland, Singapore
Posts: 1,309
Received 0 Likes
on
0 Posts
Most important things have been said.
NASA proved the concept of PCA, FAA desided that it's not justified. They have calculated all safety improvements and do the relation between costs and lifes saved. Those improvements with the most "lifes for the buck" get the nod.
hth,
Dani
NASA proved the concept of PCA, FAA desided that it's not justified. They have calculated all safety improvements and do the relation between costs and lifes saved. Those improvements with the most "lifes for the buck" get the nod.
hth,
Dani
Join Date: Aug 2007
Location: UK
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Yes, it may be a problem. Are you aware that faulty PBs kept YELLOW PTUs running?
Or maybe add some more logic to the PTU controller and remove the button altogether...?
Join Date: Jun 2001
Location: Over The Hills And Far Away
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
Giggey,
It was not meant as a personal attack, but more as an attack on the industry. There seems to be a move towards the "no need to know" philosophy, rather than the "need to know" one. I trust you understand the difference.
As a classically trained engineer, who do give ground courses to aircrews, I find the level of training, and basic knowledge of those participating, to be seriously lacking in one very important aspect, understanding! There is no emphasis on understanding. Complete the exercise and tick the box, that is what training seems to have become. Ham and Enos would have been right at home.
This thread, and many other, are examples of this.
It was not meant as a personal attack, but more as an attack on the industry. There seems to be a move towards the "no need to know" philosophy, rather than the "need to know" one. I trust you understand the difference.
As a classically trained engineer, who do give ground courses to aircrews, I find the level of training, and basic knowledge of those participating, to be seriously lacking in one very important aspect, understanding! There is no emphasis on understanding. Complete the exercise and tick the box, that is what training seems to have become. Ham and Enos would have been right at home.
This thread, and many other, are examples of this.
Last edited by Techman; 31st Dec 2007 at 01:23.
Techman,
Three cheers! What is even worse, is there does not seem to be a place to go look it up either! While the aircraft systems of today can be so interconnected, it would be impossable to keep them all straight during an oral or PC, it would be great to have a "reference" manual that tells the real story.
It seems the older aircraft were built on the thought that the crew would be smarter than the aircraft, and today's aircraft are built on the, oh never mind.
By the scope of this thread, I assume that the cause of the triple failure is running all three systems dry. I'll see if I get some time in the simulator next week and see what ours does. I agree it might not be completely correct, but since the simulator models what happens with each system dry, it should be able to do it with all three empty. Also, some simulators have the real computers, they are just feed inputs.
Three cheers! What is even worse, is there does not seem to be a place to go look it up either! While the aircraft systems of today can be so interconnected, it would be impossable to keep them all straight during an oral or PC, it would be great to have a "reference" manual that tells the real story.
It seems the older aircraft were built on the thought that the crew would be smarter than the aircraft, and today's aircraft are built on the, oh never mind.
By the scope of this thread, I assume that the cause of the triple failure is running all three systems dry. I'll see if I get some time in the simulator next week and see what ours does. I agree it might not be completely correct, but since the simulator models what happens with each system dry, it should be able to do it with all three empty. Also, some simulators have the real computers, they are just feed inputs.
Join Date: Jan 2006
Location: US
Posts: 2,205
Likes: 0
Received 0 Likes
on
0 Posts
AA DC-10 had a jammed stabilizer. Not the same as a total hydraulic loss but they were able to land using the #2 engine to change the pitch attitude. Using the wing mounted engines also has a pitching moment(power up, nose up, power back, nose down)
DC-10 into KSUX had total hydraulic failure. Read the NTSB witness statements, and not the final report. CKA Dennis Finch(sp?) saved the day.
A300 had total hydraulic failure after SAM impact. Did one go-around and then landed on the runway.
Total hydraulic failure is possible. It can be survivable but is tough to accomplish. I'm 2 out of 3 in my attempts. Fairly easy, very tough, and then a crash.
Try it and be humbled...
DC-10 into KSUX had total hydraulic failure. Read the NTSB witness statements, and not the final report. CKA Dennis Finch(sp?) saved the day.
A300 had total hydraulic failure after SAM impact. Did one go-around and then landed on the runway.
Total hydraulic failure is possible. It can be survivable but is tough to accomplish. I'm 2 out of 3 in my attempts. Fairly easy, very tough, and then a crash.
Try it and be humbled...
Join Date: Aug 2005
Location: Estonia
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
They do the maths and they come out with chances of it happenning so low, that it doesn't justify the installing of the fourth system.
A300 and DC10 have 3 redundant hydraulics. B747 and L1011 have 4. No one seems to have bothered with 5.
The JAL B747 which had a rear bulkhead explosion lost all 4 redundant hydraulic systems, just like the DC10 lost all 3 to tail engine explosion and the DHL A300 lost all 3 to a rocket hit in wingtip.
It follows that multiple common-cause failures are not an unlikely event - has happened 3 times already - you could be the fourth.
A320 has 3 hydraulic systems - like A300. But unlike A300 and A310, the A320 has glass cockpit, fly by wire and sidesticks.
If an A320 were to lose one wingtip and all three hydraulics just like the A300 did - how would the cockpit controls react?
Join Date: Jul 2007
Location: taking up the hold
Age: 53
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
Sim modelling
With regard to earlier posts about whether a sim would accurately reproduce the flight characteristics first airbus would have to establish exactly what those characteristics are.
Do you really think they are going to want to fly around with no hydraulics just to see what an extremely unlikely failure would be like?
Do you really think they are going to want to fly around with no hydraulics just to see what an extremely unlikely failure would be like?