Schweizer 333 who uses them ?

[A.Agincourt]

Hughes500:

Just inheriteted some 333 parts, apart from putting them on a shelf to gain dust any operators out there or will Sikorsky restock ?

Your original post. I am focused on S333 since that seems to be what you are on about and that is what I am referring to.

Best Wishes

[Chris P Bacon]

Talk with Randy at Fuch Helicopters in Switzerland. They are flying a couple for training, having taken two of the aircraft which were at Fast.

[Hughes500]

AA

just so you know they came with all the 269 parts that i was after so didnt have much option.

[A.Agincourt]

Hughes500 AA just so you know they came with all the 269 parts that i was after so didnt have much option.

Ok now all is now clear.

Best Wishes

[333 user]

333 parts needed

I would like to know what 333 parts you may have available. We are looking for a Forward Landing Gear Cross Beam P/N: 269D7117-1.

[shanesmith]

Just to let anybody who's interested know I own G-TAMA and have it sitting in west sussex while I decide what to do with it. Any ideas?

[JTobias]

Hi

Try contacting Rene at Heli Holland.
He has one that he parts out for spares and may be interested in another.

Joel

[PANews]

End of the line?

In Post 16 [dated 2012] I reported the negative attitude of Sikorsky to the 434 [and therefore by default the 333] - well in 2013 I can report that that has not improved one iota.

Last month San Antonio PD in Texas [arguably the biggest fleet user] announced new orders or Eurocopter..... thereby announcing by default it is giving up its 333 fleet shortly.

The 333 looks like being a niche airframe flown as and when someone breaks another one.

The situation with the S300/269 looks little better

[Phoinix]

I can't see how its better for S300. We can't get parts like booster or rotor dampers for ages. Shortly, Enstrom will fill its place.

[shanesmith]

Thanks JTobias for the info. after an evening of thoughts. I think I might mount it on a plinth 30ft in the air at my business address for a few months whilst I work out the best plan for G-TAMA. Such a shame to dismantle a fine heli

[heli1]

Of course shanesmith,you could always donate it to the Helicopter Museum ........ !

[Chris P Bacon]

Fuch Helicopters in Switzerland have just retired the three 333's they operated (including the two ex TAM machines) for the same reason; none existant support from Sikorsky.
I expect the aircraft will be broken up, with Fuch concentrating on MD500's.

[HeliHenri]

.

with Fuch concentrating on MD500's.

Hello Chris P B,

Fuchs fly also MD600, MD 902 and EC120.

.

[Cmason]

Looking for Schweizer 333 parts

Hi,

Recently purchased a schweizer 333 for display purposes. Interested in any parts anyone may have including blades.

Thanks

[Cmason]

Schweizer 333 parts (G-Tama)

Hi Hughes500,

not sure if you received my previous message however we recently purchased G-TAMA schweizer 333 with a view to installing it as a bit of a curio at one of our sites. It has many parts missing and we are interested in acquiring these to give the impression of a fully functioning machine.

The mains parts we are looking for include (sorry if my terminology is incorrect),:
The main blades and blade assembly clamp
Rear tail rotor/blade
Selected cockpit instruments.

Any help much appreciated.

Regards


Christopher Mason.

[Chris P Bacon]

333 parts

Try contacting either SP Helicopters in Germany or Fuchs Helicopters in Switzerland. Both have two or three 333's which are for disposal, plus spares, including some unserviceable items.

PM me if you need a point of contact.

[Hughes500]

don't have much left I am afraid, although do have the blade grips and some tail rotor blades

[Stealth1000]

schweizer 333

HI I search main rotor shaft 269D5308
if somebody have this part i am buyer
thank you

[ascj]

Is it the same as a 300?

[Marichu]

G'day

Originally Posted by Hughes500

Just inheriteted some 333 parts, apart from putting them on a shelf to gain dust any operators out there or will Sikorsky restock ?
Answers on a post card !

I am interested in the S333 parts you have.
Can you kindly email me the description of the parts for the S333 and how much you want for them.
My email is [email protected].

Many thanks
Ferris