jamestkirk
24th February 2007, 12:55
Can anyone answer the question why you need to fuel strain the tip tanks for 11 seconds and the inboard tanks for 6 seconds minimum as stated in the POH.
Thanks
Malcom
24th February 2007, 20:12
They are further away from the central drain point than the inners ????:rolleyes:
NutLoose
27th February 2007, 14:18
Possibly they are more prone to water ingress than the mains and a six second sample may only give you a tester full of water so you would miss that is was water and not fuel....... therefore they have increased the time required so you can be sure its fuel and not a mix.