RW type C

[qwsa]

Hi there!
I need some help.
From FCOM A320 :It is not permitted to operate on Type C runways
Wher can i find some info about RW typs?
Do you know what that typs mean?
Thanks a lot.

[Skyjob]

Maybe you mean the following?

ICAO AERODROME STANDARDS (http://www.icao.int/safety/Implementation/Library/Manual%20Aerodrome%20Stds.pdf)

Page 17
Code Element 1:
Code number "3"
Aeroplane reference field length "1200 m up to but not including 1800 m"
Code Element 2:
Code letter "C"
Wing span "24 m up to but not including 36 m"
Outer main gear wheel span "6 m up to but not including 9 m"

Page 28
The width of a runway shall be not less than the appropriate dimension specified in the following tabulation:
Code number 3
Code letter A: 30m
Code letter B: 30m
Code letter C: 30m
Code letter D: 45m

[OverRun]

Skyjob has given the detail. Basically, A320s should not operate on 30m wide runways. The 737 can, given certain limitations. I actually thought there was a procedure whereby A320s could use 30m runways as well.