PDA

View Full Version : How do you use wind data


galaxy flyer
22nd Jun 2012, 17:05
Anyone,

Given:

Runway 15
Winds: 260/15G20 Variable 240-330

How would apply the winds to make the landing calculation? Apply the basic wind, factor in the gusts or use the variable wind to arrive at an exceedence of the 10 knot tailwind component?

In the military heavies, we always used the "worst case", so added to the gust, the worst variable and, in this case, the wind limit was exceeded.

GF

Denti
22nd Jun 2012, 17:21
Most conservative or worst case, whatever you want to call it, still the correct way to do it. Our operation manual specifically includes gust values into the landing wind limit calculation, and of course the worst case wind direction has to be taken into account.

VijayMallya
22nd Jun 2012, 17:49
Same as specified by Denti...


The gut component, for e.g., r/w 28 winds 280/10G20 then just use 10 knots as head wind...

If R/W 28 winds 090/10G20 then use 20 knots TWC

saddest aviator
22nd Jun 2012, 18:09
Firstly, Why are ATC insisting that you use a runway with an excessive TWC?
Secondly V ref + calculations are predicated on the HWC of the wind. eg a 90deg x wind at 20 kts HWC nil therefore Vref +5 any gusts would cause additions. But the question remains that landing with a gusting TWC is setting yourself up for a rather unnecessary incident. Insist that the runway is changed:rolleyes:

VijayMallya
22nd Jun 2012, 18:23
There are lot of airfields which have unidirectional runways e.g., Port Blair

misd-agin
22nd Jun 2012, 18:27
Our manuals state that gusts are not limiting.

Judgement call with gusts. You can't go wrong using worst case but by not making it limiting it allows some leeway.

Nice having significant amounts of water around airports. You can see the gusts on the water. Are the gusts everywhere or less frequent? Again, comes down to judgement.

Denti
22nd Jun 2012, 18:32
We used to have no guidance on gusts at all in regard to limits. It changed a lot after an incident of our biggest competitor in hamburg a few years back. Since then all limits are including gusts.

FlightPathOBN
22nd Jun 2012, 20:24
variable 240-330? Can you ask for a better report?? :ugh:

Don Coyote
23rd Jun 2012, 10:12
misd-agin - Which manuals, the operations manuals or the POH? There is a big difference, often an operator will put information into their operations manuals that is not supported or substantiated by the manufacturers’ information.

schooner
23rd Jun 2012, 10:18
From what I can remember ATC have only passed a wind direction and speed when clearing us to land with no mention of "variable between" so makes the VREF calculation a wee bit easier.

misd-agin
23rd Jun 2012, 13:30
Don Quixote - company manuals.

galaxy flyer
23rd Jun 2012, 17:37
The airport in question is a mountainous, essentially one-way, operation. Mountainous airports can have the worst combination-one way AND treacherous winds affected by heating in the valley or foehn conditions.

Thanks and anymore replies, I'd be pleased to listen to.

GF

FlightPathOBN
23rd Jun 2012, 18:44
C'mon you can tell us! (it sounds like KPSP, except for the 15 part)

galaxy flyer
24th Jun 2012, 00:08
FlightPathOBN

KASE, If you must know, BUT the location is irrelevant, the question is the correct, WRT certification, method to apply winds.

GF

flyzhz
24th Jun 2012, 01:54
we use half of the head wind plus (gust -wind speed),not less than 5 and not above 20 or the flap manuv speed -5
If you really want to land,teel the ATC,too strong wind for me,then he will tell you the wind is weak now.:ugh:

Milt
24th Jun 2012, 03:54
Wind From or To

Who was/were the idiots who decided that we should use a wind direction of where it is coming from instead of where it is going to? I guess it was some sailor standing on his poop deck and I'll bet his course is not where he has come from!!

Ollie Onion
24th Jun 2012, 06:19
Well in that case I would use the reciprocal runway (RWY33). Worst case on that runway would be ALL crosswind, as opposed to a significant tailwind possibly on RWY15. Assuming RWY33 not a possibility then I would use the gusts to determine if the tailwind was within limits.

FlightPathOBN
24th Jun 2012, 16:39
Everything from the FAA guidance is worst case. I would love to use a component wind...I dont mean for the winds, but for the gusts, just dont see a lot of support for that...

Bears sorting it out with your chief...

galaxy flyer
24th Jun 2012, 17:02
FlightPathOBN

Do you have a FAA reference for the statement of "worst case"?

GF

FlightPathOBN
24th Jun 2012, 18:20
Let me run that down...my reference point is from the design of the procedures, and some of the components and coding in the FMS....I will see what, if any, relates to flight ops....
That is quite a variable wind, and I can certainly see many issues setting up the config for final. As everyone is noting, the system allows for a simple input...

Land fast, brake hard.