PPRuNe Forums
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

PPRuNe Forums (https://www.pprune.org/)
-   Tech Log (https://www.pprune.org/tech-log-15/)
-   -   Vmcg- calling John Tullamarine. (https://www.pprune.org/tech-log/631946-vmcg-calling-john-tullamarine.html)

FlightDetent 31st May 2020 23:50
Could be, thought the same
If the calculation for FLEX perhaps hit the limit of Vmcg in an iterative manner, could it be the SW defaulted into TOGA results (similar to the fixed printed scenario above) instead of re-doing the FLEX values properly?
. I.e the SW is not calculating the perf. data, but rather looking them up instead. If it's a 3rd party provider not likely they have much other choice.


All times are GMT. The time now is 08:46.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.