PPRuNe Forums - World's first 3D printed jet engine

PPRuNe Forums (https://www.pprune.org/)

- Tech Log (https://www.pprune.org/tech-log-15/)

- - World's first 3D printed jet engine (https://www.pprune.org/tech-log/557317-worlds-first-3d-printed-jet-engine.html)

World's first 3D printed jet engine

From the Sydney Morning Herald.

The story doesn't say whether they've tried flying it ...

Check Your Shorts, Please!

If not mistaken, they are talking about ONE part, one of thousands for a major jet engine. It is called research. Your airplane is not flying with 3-D printed engines. :=:rolleyes:

Have a look at the "3D printing a jet engine" thread on Jet Blast - it's been running for a few days, now.

Quote:

If not mistaken, they are talking about ONE part, one of thousands for a major jet engine.

No, you're mistaken. If all else fails, you could read the linked article:

Quote:

The development of the jet engine began two years ago, when Amaero engineers and Monash University researchers joined forces to answer a challenge from French aerospace giant Safran.

"They gave us an old engine, we pulled it apart and then part by part we've been manufacturing it for them," Amaero's business development manager Ben Batagol said.