go around flaps in A320
 

What configuration would you select in case of go around on an approach with final landing configuration 3 :

conf 1 + F

OR

conf 2

?

Flap2 unless you have run the overweight landing QRH drill and determine you need to use conf 1+f

I_FLYINDIGO
From QRH OVERWEIGHT LANDING
If the aircraft weight is above the maximum weight for go-around (given in the table below), use FLAP 3 for landing.
In all cases, if landing configuration is different from FLAP FULL, use 1+F for go-around.
The second line also is applicable only for overweight landing. For weight below max landing go round with flap one step less.