Rear mounted engines
 

Hello folks.

I was going through basics of aerodynamics and came across deep stall.
I have a question that what is the primary purpose of rear fuselage mounted engines such as in MD-80 etc . Is it to improve response to deep stall or is there any other reason for placing them on the rear part?

Thanks.

Rear mounted engines worsen Deep Stall rather

See this thread for previous recent coverage of this subject

http://www.pprune.org/flight-testing...ounted+engines

Rear mounted engines
 

Hi,

Try this link

Rear Mounted Engines — Tech Ops Forum | !!!!!!!!!!!!!!

Brgds

Advantage:

1. Easier to control with an engine failure

2. Lower VMC hence a construction of a small Rudder area (saves weight)

3. Aerodynamically clean wing

4. Less cabin Noise

5. Uncontained failure will not damage wing area i.e leading edge slats etc ..

6. Aircraft looks better


Disadvantage:

1. Difficult access for engines during maintenance

2. The missing engine weight underneath the wing requires more strengthened wing structure to avoid high bending forces

3. Longer tubing required for hydraulic and fuel lines which adds extra weight

4. Possible damage from landing gear deflection.

5. T tail design required resulting in super stall characteristics

6. Airflow interference between fuselage and engine Inlet

7. Due to missing engine pylons more modification needs to be done on the wing to avoid Spanwise flow and wingtip stall.